LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Control Module >> Adjustment - Replacement >> Body Control Module (BCM) (707) >> To fit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

To fit

  1. Fit the control module.
    Fig 1: Illustration For Steps 1-2
    G03719253Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION  .
  2. Plug in the connector.
  3. Fit the lower section of the dashboard
    Fig 2: Illustration For Step 3
    G03719254Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. If the control module has been replaced:  Carry out procedures after changing a control module. See PROCEDURE AFTER CHANGING CONTROL MODULE  .
scientia non olet · About LEMON Manuals