LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Control Module >> Adjustment - Replacement >> Control module, door >> To fit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

To fit

  1. Fit the door module pressing it obliquely upward so that the clip engages.
    Fig 1: Illustration For Steps 1-2
    G03719242Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. When changing the driver door module:  Fit the door trim screw.
  3. When changing the driver door module:  Affix the cell block with double-sided tape. The use of 16-30 20 807 is recommended.
  4. Make sure the door trim clips are in place and intact. Replace the clips if necessary.
  5. Fit the door trim.
  6. Cars with pinch protection:  Perform Programming of the pinch protection. See ELECTRIC MOTOR FOR SUNROOF (WITH PINCH PROTECTION)  .
  7. If the control module has been changed  , perform Measures after changing the control module. See PROCEDURE AFTER CHANGING CONTROL MODULE  .
scientia non olet · About LEMON Manuals