Programming for garage with fixed code

The garage opener can record and store the frequencies of three different remote controls.

The battery in the remote control should be fairly new for programming to work well.

1. Turn the ignition ON.
2. Hold the garage door remote control 3-7 cm below the rearview mirror. Sit where you can see the LED during programming.
   Fig 1: Identifying Indicator In Rear View Mirror

   Courtesy of SAAB-SCANIA OF AMERICA, INC.
3. Press the remote control button and the desired button on the rear view mirror at the same time.
4. The LED will now start to flash, slowly at first and then rapidly. The rapidly flashing LED indicates that programming is complete and that you can release the buttons.