LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-5 Linear, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Glass, Windows & Mirrors (2) >> Adjustment-Replacement >> Programming the remote control, garage door opening >> Reprogramming a button
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogramming a button

  1. Turn the ignition ON.
  2. Press and hold the desired button on the rearview mirror for the entire programming procedure.
  3. The LED will start to flash slowly after 20 seconds.
    Fig 1: Identifying LED Flashing
    G03746295Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Hold the garage door remote control 3-7 cm from the rearview mirror and press the button on the remote control.
    Fig 2: Holding Garage Door Remote Control 3-7 Cm From Rearview Mirror
    G03746296Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Reprogramming is complete when the LED starts to flash rapidly.

    The previous frequency is now erased and replaced by the new one. Reprogramming one button does not affect the other buttons.

scientia non olet · About LEMON Manuals