Check Neutral Position Switch

Turn the ignition switch to OFF.

Disconnect the connector from transmission harness.

Place the shift lever in a position neutral.

Measure the resistance between transmission harness and connector terminals.

Connector & terminal 

(T2) No. 1 - No. 2: 

Is the resistance more than 1 MO? 

YES. Go to next step. 

NO 

Repair short circuit in transmission harness or replace neutral position switch.

Place the shift lever in neutral.

Measure the resistance between transmission harness connector terminals.

Connector & terminal 

(T2) No. 1 - No. 2: 

Is the resistance less than 1 O? 

YES. Go to next step. 

NO 

Repair short circuit in transmission harness or replace neutral position switch.