LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Control Module (Late; 9440)) >> Adjustment-Replacement >> MCC unit (504) >> To remove
April 5, 2026: LEMON Manuals is launched! Read the announcement.

To remove

WARNING: This page is about a different car, the 2003 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the MCC unit by carefully pulling it out. Use 82 93 474 Removal tool to remove the unit.
    Fig 1: Illustration For Step 1
    G03617167Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  2. Remove the MCC unit's connector.
    Fig 2: Illustration For Step 2
    G03617168Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Lift out the MCC unit.
scientia non olet · About LEMON Manuals