LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2008 >> 9-7X V8-6.0L >> Repair and Diagnosis >> Maintenance >> Alignment >> Specifications >> Trim Height Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Trim Height Specifications


Trim Height Specifications

Trim height must be verified and adjusted before aligning the vehicle.

Z Height Measurement

All 53 mm (2.09 in) ± 12 mm (0.47 in)

The Z height measurement determines the proper ride height for the front end of the vehicle. Vehicles equipped with torsion bars use an adjusting arm to adjust the Z height. Vehicles without torsion bars have no adjustment and may require replacement of suspension components.

Important: All dimensions are measured vertical to the ground. Cross vehicle Z heights should be within 24 mm (0.9 in).




D Height Measurement

All 110 mm (4.33 in) ± 4 mm 0.16 in)

The D height measurement determines the proper ride height for the rear end of the vehicle. There is no adjustment procedure. Repair may require replacement of suspension components.

Important: All dimensions are measured vertical to the ground. Cross vehicle D heights should be within 12 mm (0.5 in) for vehicles equipped with coil springs. Vehicles equipped with air suspension should be within 8 mm (0.3 in).
scientia non olet · About LEMON Manuals