LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2011 >> 9-3X Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Glass, Windows And Mirrors >> Repair Instructions >> Programming the remote control, garage door opening >> Reprogramming a button
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogramming a button

  1. Turn the ignition ON.
  2. Press and hold the desired button on the rearview mirror for the entire programming procedure.
  3. The LED will start to flash slowly after 20 seconds.
    Fig 1: LED Will Start To Flash Slowly After 20 Seconds
    G05042680Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Hold the garage door remote control 3-7 cm from the rearview mirror and press the button on the remote control.
    Fig 2: Pressing Remote Control Button
    G05125479Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Reprogramming is complete when the LED starts to flash rapidly.

    The previous frequency is now erased and replaced by the new one. Reprogramming one button does not affect the other buttons.

scientia non olet · About LEMON Manuals