LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1992 >> SL1 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Ignition Module (IDI) >> Removal & Installation (2.3L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (2.3L)

  1. Disconnect negative battery cable. Disconnect 11-pin harness connector. Remove 4 ignition module cover-to-cam carrier bolts.
  2. Remove ignition system assembly from engine. Remove 4 housing cover screws. Remove housing cover. Remove coil harness connector from module. Remove module-to-cover screws. Remove module from cover. To install, reverse removal procedure.
NOTE: DO NOT  wipe grease from module or coil if module is not being replaced. If installing a new module, spread silicone grease on metal face of module and on cover where module seats. Grease is included with new module and is necessary for module cooling purposes.
scientia non olet · About LEMON Manuals