September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Temperature Control Cable
- Ensure A/C-heater control panel is installed. At heater case, ensure temperature control cable end is connected to door lever and cable housing is engaged in hold-down clip. Remove radio. At A/C-heater control panel, ensure temperature control cable housing is released from hold-down clip, and cable end is connected to pin on controller lever.
- Move temperature control lever to full cold position. At heater case, ensure temperature door lever is in full rearward position. At A/C-heater control panel, engage cable housing into hold-down clip. Check cable operation for binding or backlash.