LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1994 >> SW2 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Removal & Installation >> Front Wiper Module/Motor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wiper Module/Motor: Installation

  1. Connect wiring to new motor and turn switch on. Turn off switch. This will place motor in PARK position. Place wiper motor onto control module. Position crank arm at 9 o'clock position and install on wiper motor shaft. Apply Loctite to crank arm attaching nut and tighten to 21 ft. lbs. (28 N.m)
  2. Partially install wiper module in vehicle. Connect wiring to motor and module. Install motor/module assembly. Tighten to 89 INCH lbs. (10 N.m). Turn switch on momentarily, then turn off. Wiper arm should be in PARK position with crank arm at 9 o'clock position. Connect washer fluid hose (if equipped). Install cowl trim panel. Install wiper arms.
  3. Rotate defroster nozzle into mode valve assembly and install screws. Ensure nozzle is attached on both sides of HVAC module. Install upper trim panel into clips at windshield. Install trim panel screws and screw caps. Test wiper operation.
scientia non olet · About LEMON Manuals