October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC will also set under the following parameters:

Cruise switch in ON position - Voltage is less than .5 volt or greater than one volt at the PCM cruise switch input circuit.
Cruise switch in RESUME/ACCEL position - Voltage less than 1.2 volts or greater than 1.7 volts at PCM cruise switch input circuit.
Cruise switch in SET/COAST position - Voltage less than 3 volts or greater than 3.5 volts at PCM cruise switch input circuit.