LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1996 >> SL2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Fuel System >> Fuel Control >> Fuel Injector(s)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Injector(s)

Disconnect fuel injector harness connector. Measure resistance across injector terminals at each injector. Resistance should be as specified. See INJECTOR RESISTANCE SPECIFICATIONS table.

INJECTOR RESISTANCE SPECIFICATIONS (1)

Application Ohms
1.9L 1.5-2.5
(1) Injector resistance specification is at 140°F (60°C).
NOTE: If injectors are dirty, they should be cleaned using approved injector cleaning procedure before performing INJECTOR BALANCE TEST.
scientia non olet · About LEMON Manuals