Installation Procedure
- Position the door trim panel to the door structure at the attaching hooks. Lock in the door trim panel by pushing downward on the door trim panel.
- Install the door trim panel fasteners at the pull cup and at the rear of the door trim panel.
- Close the access cover.
- On manual window vehicles:
install the manual window regulator handle clip on the handle.
- Install the door handle onto the vehicle with the handle pointed in a forward and slightly upward position with the window closed.
- Position the door handle assembly in the trim panel. Tip the handle outward at the top.
- Using a thin hook style tool, lift the latch and lock rods into the trim panel and slide rearward to engage the tabs.
- Install the screw in the handle.