LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1999 >> SL2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System Removal, Installation & Overhaul >> Ignition System >> Ignition Control Module (IDI) >> Removal (2.4L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal (2.4L)

CAUTION: If spark plug boots adhere to spark plugs, use Boot Remover (J-36011). Twist first, and then pull upward. Boots must be in place on housing before installing ignition system assembly, or damage may result.
  1. Disconnect negative battery cable. Disconnect 11-pin harness connector. Remove 4 IDI cover assembly-to-camshaft housing bolts. Remove ignition system assembly from engine.
  2. Remove 4 coil housing-to-cover screws. Remove housing cover. Remove coil harness connector from module. Remove module-to-cover screws. Remove module from cover.
scientia non olet · About LEMON Manuals