Sensing And Diagnostic Module (SDM) Connector Does Not Mate With Replacement SDM (Replace Terminal Retainer And Reprogram Body Control Module (BCM)) (01-T-20)
WARNING: This page is about the LS2 Automatic, which is a different variant/trim than selected.
Publication date: 2001-04-01Reference number: 01-T-20
SENSING AND DIAGNOSTIC MODULE (SDM) CONNECTOR DOES NOT MATE WITH REPLACEMENT SDM (REPLACE TERMINAL RETAINER AND REPROGRAM BODY CONTROL MODULE (BCM))
TECHNICAL SERVICE BULLETIN
Reference Number(s): 01-T-20, Date of Issue:
April, 2001
| SATURN: | All 2000 L-Series Vehicles |
| SECTION: | 02-Restraints |
DESCRIPTION
Sensing And Diagnostic Module (SDM) Connector Does Not Mate With Replacement SDM (Replace Terminal Retainer And Reprogram Body Control Module (BCM))
Replacement SDM will not mate with the instrument panel harness connector due to a change in configuration of the terminal retainer.