October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

REMOVAL
1. Remove knock sensor wire from clip on CMP sensor.
2. Remove CMP sensor bolt.
3. Disconnect CMP sensor electrical connector.
4. Remove CMP sensor.

INSTALLATION
1. Install CMP sensor by gently pressing into place.
2. Install CMP sensor bolt.

Torque: 8 N.m (71 in-lbs)

3. Connect CMP sensor electrical connector.
4. Re-attach knock sensor wire to clip on CMP sensor.