LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SC1 Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System/Traction Control System >> Removal & Installation >> Wheel Speed Sensors >> Removal & Installation (Rear)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation (Rear)

NOTE: The rear wheel speed sensor is not serviceable separately. If sensor is faulty, replace rear hub/bearing assembly.
  1. Raise and support vehicle. Remove wheel to affected sensor. Disconnect wheel speed sensor harness connector. Remove brake drum. Remove brakeline from wheel cylinder. Remove hub-to-knuckle bolts. Remove hub/bearing assembly. Wheel speed sensor is built into hub/bearing assembly.
  2. To install, reverse removal procedure. Tighten all mounting bolts to specifications. See TORQUE SPECIFICATIONS  table. Bleed brake system. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals