LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SC1 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Cruise Control System) >> Removal & Installation >> Powertrain Control Module (Pcm) >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove TAC module. See THROTTLE ACTUATOR CONTROL (TAC) MODULE  . Loosen, but do not remove rear PCM retaining fastener. Use rear fastener as an anchor for outer bracket.
  2. Remove front PCM retaining fastener. Reposition PCM outer bracket. Remove PCM from bracket and extract from vehicle. To install, reverse removal procedure. After installation, perform computer relearn procedure. See COMPUTER RELEARN PROCEDURES -- GENERAL MOTORS article in GENERAL INFORMATION.
scientia non olet · About LEMON Manuals