October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation
- Disconnect negative battery cable. Remove Connector Position Assurance (CPA) retainer clip. Disconnect cruise control module harness connector. Disconnect cruise control cable from accelerator pedal by squeezing tabs. See Figure
. Remove cruise control module retaining nuts and remove cruise control module.
- To install, reverse removal procedure. Tighten cruise control module retaining nuts to 53 INCH lbs. (6 N.m). Adjust cruise control cable. See CRUISE CONTROL CABLE
under ADJUSTMENTS.