Cylinder Head - End View
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Cylinder Head - End View
| Hole | Thread Size | Insert | Drill | Counterbore Tool | Tap | Driver | Drill Depth - Maximum mm (in) | Tap Depth - Maximum mm (in) |
|---|---|---|---|---|---|---|---|---|
| 1 | M10 x 1.5 | J 42385-215 | J 42385-211 | J 42385-212 | J 42385-213 | J 42385-214 | 28.0 (1.10) | 20.0 (0.787) |
| 2 | - | N/A | - | - | - | - | - | - |
| 3 | M10 x 1.5 | J 42385-215 | J 42385-211 | J 42385-212 | J 42385-213 | J 42385-214 | 28.0 (1.10) | 20.0 (0.787) |
| 4 | N/A | - | - | - | - | - | - | - |
| 5-6 | M10 x 1.5 | J 42385-215 | J 42385-211 | J 42385-212 | J 42385-213 | J 42385-214 | 28.0 (1.10) | 20.0 (0.787) |