Scan Tool Output Controls
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Automated Bleed | - | Used in order to bleed the ABS hydraulics. Refer to ABS Automated Bleed Procedure . |
| Automated Test | - | Cycles each solenoid valve and the pump motor in order to verify component operation. This test is identical to the Initialization Sequence. If a malfunction is detected, the EBCM will set the appropriate DTCs. The DTCs will be displayed upon completion of the test. |
| LF Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LF Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LR Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LR Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| Pump Motor Test | - | Commands the pump motor ON and OFF. |
| RF Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RF Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RR Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RR Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| Steering Position Sensor Test | - | Tests the steering wheel position sensor (SWPS) ability to provide a valid input. |