LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> L200 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Computerized Engine Controls >> Wheel Speed Signal Conditioner Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Wheel speed signal conditioner module is located under left side of Instrument Panel (IP), above the hood release. Turn OFF the ignition. Remove left side lower IP closeout panel (hush panel) attachment fasteners. Remove left side lower IP closeout panel.
  2. Remove left side lower heater duct assembly attachment fastener and remove left side lower heater duct assembly. Remove wheel speed signal conditioner module. The module is an Orange colored component, which is similar to, but slightly larger than a relay. The module should be removed like a relay. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals