Installation Procedure
- Connect the cruise control throttle cable to the cruise control module connecting strap.
- Install the cruise control throttle cable to the cruise control module by rotating 1/4 turn clockwise.
- Install the cruise control module with the throttle cable into the frame rail bracket and install the attachment bolts.
Tighten: Tighten the cruise control module to frame rail bracket bolts to 10 N.m (89 lb in).
- Install the throttle cable clip to the front of the dash stud.
- (1) - Cruise Control Throttle Cable
- (2) - Adjuster (Shown here, actually further back on cable)
- (3) - Cable Snap
- (4) - Cable End
- Install the cruise control throttle cable snap to the throttle body cam.
- Install the cruise control throttle cable to both attachment clips.
- Connect the cruise control module harness connector. Push in until a click is heard and pull back to confirm a positive engagement.
- Adjust the cruise control throttle cable. Refer to Cruise Control Throttle Cable Adjustment .
IMPORTANT:
Do not twist the connecting strap during installation.