LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion 1 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Position the engine purge pipe (1) to the EVAP canister purge valve (2) and the intake manifold.
  2. Connect the engine purge pipe (1) to the intake manifold.
  3. Connect the engine purge pipe (1) to the EVAP canister purge valve (2).
    4. Fig 1: Identifying Evaporative Emission (EVAP) Hoses/Pipes
    GM783172Courtesy of GENERAL MOTORS CORP.
  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals