Engine Control Module (ECM) Connector End View C1 (2.2L)
Engine Control Module (ECM) Connector End View C1 (2.2L)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | GY | 705 | 5 Volt Reference |
| 3 | D-GN | 890 | Fuel Tank Pressure Sensor Signal |
| 4 | PU | 420 | Stop Lamp Switch Signal |
| 5 | GY | 1884 | Cruise Control Set/Coast and Resume/Accelerate Switch Signal (K34) |
| 6 | - | - | Not Used |
| 7 | PU | 1589 | Fuel Level Sensor Signal |
| 8 | BN | 4 | Accessory Voltage |
| 9 | - | - | Not Used |
| 10 | BK | 2759 | Low Reference |
| 11 | L-BU | 20 | Stop Lamp Switch Signal |
| 12 | PU | 1807 | ECM Class 2 Serial Data |
| 13 | TN/WH | 2500 | High Speed GM LAN Serial Data Bus (+) |
| 14-15 | - | - | Not Used |
| 16 | BN/WH | 419 | MIL Control |
| 17 | WH | 1310 | EVAP Canister Vent Solenoid Control |
| 18 | PU | 1807 | ECM Class 2 Serial Data (JM4) |
| 19 | TN | 2501 | High Speed GM LAN Serial Data Bus (-) |
| 20 | - | - | Not Used |
| 21 | D-GN/WH | 459 | A/C Compressor Clutch Relay Control (C60) |
| 22 | OG | 480 | Battery Positive Voltage |
| 23 | PK | 639 | Ignition 1 Voltage |
| 24 | - | - | Not Used |
| 25 | D-GN/WH | 465 | Fuel Pump Relay Control |
| 26 | L-GN | 1887 | Cruise Control Servo Move Direction Signal (K34) |
| 27 | L-BU | 1888 | Cruise Control Servo Clutch Control (K34) |
| 28 | PK | 1886 | Cruise Control Servo Move Signal (K34) |