Scan Tool Output Controls

Body Control Module (BCM) Scan Tool Output Controls

Scan Tool Output Control	Additional Menu Selection(s)	Description
I/P Illumination Lamps	Lamp Test/Interior Lamps	The BCM turns the instrument panel illumination lamps on when you select ON. The illumination lamps should stay on until commanded OFF.
LF Turn Signal	Lamp Test/Exterior Lamps	The BCM illuminates the left front turn signal when commanded ON. The turn signal should stay illuminated until commanded OFF.
LR Turn Signal	Lamp Test/Exterior Lamps	The BCM illuminates the left rear turn signal when commanded ON. The turn signal should stay illuminated until commanded OFF.
RF Turn Signal	Lamp Test/Exterior Lamps	The BCM illuminates the right front turn signal when commanded ON. The turn signal should stay illuminated until commanded OFF.
RR Turn Signal	Lamp Test/Exterior Lamps	The BCM illuminates the right rear turn signal when commanded ON. The turn signal should stay illuminated until commanded OFF.
Security LED	Miscellaneous Test	The BCM illuminates the security telltale when commanded ON. The telltale should stay on until commanded OFF.

Instrument Panel Cluster (IPC) Scan Tool Output Controls

Scan Tool Output Control	Additional Menu Selection(s)	Description
Chime	Chime Test	The IPC turns the chime on when you select ON. The chime should sound at a slow rate until commanded OFF.
Lamp and Gage Check	-	The IPC illuminates the following indicators when you select ON: ABS Air Bag BRAKE Charge Fasten Safety Belt High Beam Low Oil Pressure LOW TRAC Upshift Indicator The IPC drives the following gages to maximum position when you select ON: Engine Coolant Temperature Gage Fuel Gage Speedometer Tachometer The indicators should stay illuminated and all gages remain at maximum until commanded OFF. When commanded OFF, the indicators should turn OFF and all gages should remain at the minimum position until the test is exited or commanded ON.
LCD Display	-	The IPC drives all LCD message center display segments on when you select ON. The IPC turns all LCD segments OFF when you select OFF. The LCD segments should stay OFF until the test is exited or commanded ON.

Scan Tool Output Control

Additional Menu Selection(s)

Description

Chime

Chime Test

The IPC turns the chime on when you select ON. The chime should sound at a slow rate until commanded OFF.

Lamp and Gage Check

The IPC illuminates the following indicators when you select ON:

ABS
Air Bag
BRAKE
Charge
Fasten Safety Belt
High Beam
Low Oil Pressure
LOW TRAC
Upshift Indicator

The IPC drives the following gages to maximum position when you select ON:

Engine Coolant Temperature Gage
Fuel Gage
Speedometer
Tachometer

The indicators should stay illuminated and all gages remain at maximum until commanded OFF. When commanded OFF, the indicators should turn OFF and all gages should remain at the minimum position until the test is exited or commanded ON.

LCD Display

The IPC drives all LCD message center display segments on when you select ON. The IPC turns all LCD segments OFF when you select OFF. The LCD segments should stay OFF until the test is exited or commanded ON.