Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rearview Mirror & Nuts

Courtesy of GENERAL MOTORS CORP.

Position the rearview mirror (1) to the door.

Fig 2: View Of Rearview Mirror & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the rearview mirror nuts (2).
Tighten: Tighten the rear door rear view mirror nuts (2) to 6 N.m (53 lb in).
Connect the rearview mirror electrical connector (3), if equipped.
Install the rearview mirror sound absorber.
Install the front door upper trim finish panel. Refer to Upper Extension Trim Panel Replacement .