Installation Procedure
WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
- Position the air cleaner assembly.
- Install the air cleaner assembly attachment bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Connect the air cleaner resonator to the air cleaner assembly.
Tighten: Tighten the air cleaner outlet duct clamps to 5 N.m (44 lb in).
IMPORTANT:
Verify full engagement of the inlet onto the resonator neck.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.