LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls (Introduction)) >> Repair Instructions >> Powertrain Control Module (PCM) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the retaining tab to secure the PCM, when installing the PCM to the underhood junction block bracket.
  2. Connect the PCM harness connectors to the PCM.
    3. Fig 1: View Of PCM
    GM1381712Courtesy of GENERAL MOTORS CORP.
  3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  4. Program the PCM. Refer to Service Programming System (SPS) in Programming.
scientia non olet · About LEMON Manuals