LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Controls - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Carefully slide the fuel level sensor into the slots on the fuel pump module bowl.
  2. Secure the retaining tab (2) on the sensor into the slot on the pump module bowl.
    3. Fig 1: View Of Fuel Level Sensor Tabs
    GM889989Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel level sensor electrical connector to the pump module.
  4. Install the fuel level sensor wiring harness to the molded-in tab (1) on the pump module bowl.
  5. Install the fuel pump module assembly. Refer to Fuel Pump Module Replacement .
scientia non olet · About LEMON Manuals