LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Removing/Installing Fuel Pump Module
    GM892958Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sender onto the new fuel pump. Refer to Fuel Level Sensor Replacement .
  2. Install the new fuel pump with the level sender and the new fuel pump-to-tank seal. Ensure the orientation tabs are aligned.
    3. Fig 2: Removing/Installing Fuel Pump Module Lock Ring
    GM892359Courtesy of GENERAL MOTORS CORP.
  3. Use the J 43827  to install the fuel pump lock ring. See Special Tools .
  4. Connect the fuel lines and wiring harness.
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals