LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Controls - 3.4L - Introduction) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Coil Assemblies
    GM28342Courtesy of GENERAL MOTORS CORP.
  1. Disconnect all the electrical connectors at the ignition control module (ICM).
  2. Note the position of the spark plug wires for installation and disconnect the spark plug wires from the ignition coils.
  3. Remove the screws securing the coil assemblies to the ignition control module.
  4. Disconnect the coils from the ignition control module.
  5. Remove the fasteners securing the ignition control module assembly to the engine.
  6. Remove the ignition control module from the bracket.
scientia non olet · About LEMON Manuals