Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Electrical Connector For Automatic Level Control Relay

Courtesy of GENERAL MOTORS CORP.

Connect electrical connector (1) into the automatic level control relay (2).

Fig 2: Locating Mounting Screw For Automatic Level Control Relay

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install mounting screw (1) into the automatic level control relay.
Tighten: Tighten screw to 6 N.m (53 lb in).
Lower the vehicle.