Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Position the ALC sensor and bracket (2) to the vehicle.
- Install the height sensor bolts/screws.
Tighten: Tighten the height sensor bolts/screws to 12 N.m (106 lb in).
- Install the ALC sensor link (3) to the ball stud (1).
- Install the ALC sensor connector.
- Lower the vehicle.
- Install the ELC/TRAILER fuse.
NOTE:
Refer to Fastener Notice
.