Multi Disc Loading: Notes
To operate the Multi Disc CD Changer in the multi disc mode, press and hold the LOAD button for 2 seconds. An audible beep will be heard and the LED to the right of the disc door begins to flash. The radio will also display the message "INSERT CD". When the LED stops flashing and turns green, load a disc. Once the disc is loaded the LED begins to flash again. The radio will also display the message "MULTI LOAD" to indicate the multi load mode has been initiated and the changer will begin accepting a disc for however many empty slots there may be. When the LED stops flashing and turns green, load another disc. Repeat this procedure to continue loading discs. The CD changer holds up to 6 discs.
When the changer is full, 6 discs are loaded, and the LOAD button is pressed, 3 audible beeps are heard and the message "CHANGER FULL" is displayed.
To play one of the CD's, press one of the preset buttons.