LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Shift Interlock System) >> Repair Instructions >> Shift Lock Solenoid/Switch Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift solenoid assembly from the shift control assembly.
    2. Fig 1: View Of Shift Solenoid Assembly
    GM886304Courtesy of GENERAL MOTORS CORP.
  2. Connect the shift solenoid assembly wiring retainers to the shift control assembly.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shift solenoid retaining screw.

    Tighten:  Tighten the screw to 3 N.m (27 lb in).

  4. Install the shift indicator bulb from the shift control assembly.
  5. Install the shift control assembly. Refer to Floor Shift Control Replacement in Automatic Transaxle - 4T40-E/4T45-E.
scientia non olet · About LEMON Manuals