LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Disconnect the cruise control module harness connector.
  3. Disconnect the cruise control cable from the cruise control module by turning the cable 1/4 turn counterclockwise.
    4. Fig 1: Aligning Cruise Control Cable
    GM329483Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the cruse control cable (1) from the accelerator pedal.
  5. Remove the nuts (2) from the cruise control module.
    6. Fig 2: Locating Cruise Control Cable
    GM854297Courtesy of GENERAL MOTORS CORP.
  6. Remove the cruse module from the vehicle.
scientia non olet · About LEMON Manuals