Inspection/Maintenance (I/M) System DTC Table
Inspection/Maintenance (I/M) System DTC Table
| System | DTCs Required to Set System Status to YES |
|---|---|
| If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) Complete System Set Procedure , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included within the conditions are additional DTCs which, if set, may inhibit the DTCs listed below from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES. | |
| Catalyst Monitor | DTC P0420-Refer to DTC P0420 . |
| Evaporative Emission (EVAP) | |
| Oxygen Sensor | DTC P0140, P1133, or P2A01-Refer to DTC P0133, P0134, P0140, P1133, P2A00 or P2A01 . |
| Oxygen Sensor Heater | DTC P0135 or P0141-Refer to DTC P0030, P0036, P0053, P0054, P0135, or P0141 . |