LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Relay 3.9 W >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Automatic Level Control Sensor Link Ball Stud Replacement (Twist Axle) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating Automatic Level Control Sensor Link Ball Stud
    GM380438Courtesy of GENERAL MOTORS CORP.
  1. Install the ball stud to the rear axle tie rod.

    Tighten:  Tighten the height sensor ball stud to 12 N.m (106 lb in).

  2. Install the automatic level control sensor link to the tie rod ball stud.
  3. Lower the vehicle.
  4. Install the ELC/TRAILER fuse.
scientia non olet · About LEMON Manuals