LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Power Steering System) >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Flow Control Valve
    GM1776816Courtesy of GENERAL MOTORS CORP.
  1. Install the flow control spring (2) into the power steering pump housing (1).
  2. Install the control valve assembly (3) into the power steering pump housing (1).
  3. Lubricate the O-ring seal (4) with power steering fluid.
  4. Install the O-ring seal (4) onto the O-ring seat on the union fitting (5).
    5. NOTE: Refer to Fastener Notice .
  5. Install the O-ring union fitting (5) to the power steering pump housing (1).

    Tighten:  Tighten the fitting (5) to 75 N.m (55 lb ft).

scientia non olet · About LEMON Manuals