Installation Procedure
- Install the object alarm module.
- Insert the object alarm module.
- Connect the 2 wiring harness plugs.
- Insert the REC.
Install the object alarm module.
- Connect the REC.
Tighten: Tighten the nut to 7 N.m (62 lb in).
- Connect the wiring harness plug for the rear electronics module (REC).
Connect the 6 wiring harness plugs.
- Close the service flap.
- Connect the battery.
- For reprogramming procedures, refer to Control Module References .
NOTE:
Refer to Fastener Notice
.