Installation Procedure
- Push the 8 new seal rings (1, 2) carefully on the valves.
- Install the new EBCM to hydraulic modulator.
Tighten: Tighten the hydraulic modulator bolts to 2 N.m (18 lb in).
- Push the EBCM onto the hydraulic modulator carefully without tilting it.
- Attach 3 new bolts.
- Install the hydraulic modulator with EBCM. Refer to Brake Pressure Modulator Valve Replacement .
- For programming procedures, refer to Control Module References .
NOTE:
Refer to Fastener Notice
.