LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2008 >> Astra XE, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the front floor console. Refer to Front Floor Console Replacement .
    2. Fig 1: View Of Selector Actuator Cable And Retaining Clamp
    GM1939173Courtesy of GENERAL MOTORS CORP.
  2. Remove the selector actuator cable (2) from the selector lever.
    • Remove the retaining clamp (1).
    • Disconnect the selector lever from the bracket.
    3. Fig 2: View Of Selector Lever Assembly And Wiring Harness Plug
    GM1938428Courtesy of GENERAL MOTORS CORP.
  3. Remove the selector lever assembly.
    • Disconnect the wiring harness plug (1).
    • Remove the 4 bolts (2).
    • Remove the selector lever assembly.
    4. Fig 3: View Of Shift Lock Actuator Bolt
    GM1938430Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 shift lock actuator from the selector lever assembly.
    • Remove the bolt (1).
      • IMPORTANT: Note the configuration of cables.
    • Disconnect the 4 wiring plugs from the shift lock actuator.
    5. Fig 4: View Of 2 Shift Lock Actuator From The Bracket
    GM1948675Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 shift lock actuator (1) from the bracket (2).
    • Carefully bend the 2 lock outward.
    • Remove the 2 shift lock actuator with the spacer plate (3).
scientia non olet · About LEMON Manuals