LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Sky Base, Standard >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Relearn >> Using Keyless Entry System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Keyless Entry System

  1. Turn ignition switch to ON position. Apply parking brake.
  2. Simultaneously press the keyless entry transmitter's lock and unlock buttons until a horn chirp sounds, indicating the learn mode has been enabled.
    NOTE: The left front turn signal will also illuminate to indicate the learn mode has been enabled.
  3. Starting with left front tire, follow either of these 2 procedures:
    • Increase/Decrease Method:  Increase or decrease tire pressure for 8-10 seconds, then wait for the horn to make a chirp sound. The horn chirp may occur before the 8-10 second pressure increase/decrease time period has been reached, or up to 30 seconds after the 8-10 second pressure increase/decrease time period has been reached
    • Sensor Activation Tool Method:  Starting with the left front tire, hold the activation tool against the tire wall aiming upward with the antenna. Press the activate button and wait for a horn chirp.
  4. After horn chirp has sounded and the right turn signal has illuminated, repeat procedure for the next 3 sensors in the following order: right front, right rear and left rear.
  5. After left rear sensor has been learned, a double horn chirp will sound, indicating all 4 sensor IDs have been learned. Turn ignition switch to OFF position. Adjust all tire pressures to specification.