Door Lock Control Module Scan Tool Information (Passenger Door Switch)

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Passenger Door Switch Scan Tool Data Parameters

Parameter	System State	Expected Value	Description
Operating Conditions: Ignition ON
Battery Voltage Signal	-	Varies	This displays volts. This is the voltage input supplied to the passenger door switch.
Door Key Cyl. Unlock Switch	-	Idle	The scan tool displays Idle or Unlock. This is the state of the passenger door key cylinder unlock switch.
Door Lock Actuator Cmd.	-	Off	The scan tool displays Off, Unlock or Lock. This is the state of the door lock actuator.
Front Window Motor Fault Status	-	No Fault	The scan tool displays No Fault, Motor Fault, Hall Fault, Memory Fault, LIN Fault, Anti-Trap Fault, Thermo-Active, Not Normalized. This is the status of the front window motor faults.
Front Window Motor Status	-	Off	The scan tool displays Off, Up, Down, Reverse, Vent Open/Short, Closed. This is the status of the front window motor when commanded on.
Memory Switch Backlight	-	Varies	The scan tool displays %. This is the intensity of the backlighting in the memory switch.
Passenger Door Ajar Sw.	-	Inactive	The scan tool displays Active or Inactive. This is the state of the passenger door ajar switch.
Passenger Door Open Sw.	-	Inactive	The scan tool displays Active or Inactive. This is the state of the passenger door open switch.
Passenger Window Switch	-	Off	The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch.
Seat Back Heat Mode Ind. Cmd.	-	Off	The scan tool displays On or Off. This is the state of the seat back heat mode indicator.
Seat Back Heat Mode Sw.	-	Inactive	The scan tool displays Active or Inactive. This is the state of the seat back heat mode switch.
Seat Cool Mode Ind. Cmd.	-	Off	The scan tool displays On or Off. This is the state of the seat cool mode indicator.
Seat Cool Mode Switch	-	Off	The scan tool displays On or Off. This is the state of the seat cool mode switch.
Seat Heat High Ind. Cmd.	-	Off	The scan tool displays On or Off. This is the state of the seat heat high indicator.
Seat Heat Medium Ind. Cmd.	-	Off	The scan tool displays On or Off. This is the state of the seat heat medium indicator.
Seat Heat Low Ind. Cmd.	-	Off	The scan tool displays On or Off. This is the state of the seat heat low indicator.
Seat Heat Mode Cmd.	-	Off	The scan tool displays On or Off. This is the state of the seat heat mode.
Seat Heat Mode Sw.	-	Inactive	The scan tool displays Active or Inactive. This is the state of the seat heat mode switch.
VIN Learned	-	Yes	The scan tool displays Yes or No. This is the state of the passenger door switch VIN programming.
Window Switch Backlight	-	Varies	The scan tool displays %. This is the intensity of the backlighting in the window switch.

Passenger Door Switch Scan Tool Output Controls

Output Control	Description
Door Deadbolt Lock/Unlock	This command will lock and unlock the passenger door dead bolt actuator.
Door Lock/Unlock	This command will lock and unlock the passenger door lock actuator.
Front Window Motor	This test will command the front window both Up and Down.
Heated Seat Indicators	This will command the heated seat indicators ON and OFF.
Integrated Sw. Backlighting Test	The scan tool commands the % intensity of the integrated switches backlighting.
Mirror Fold	This will command the passenger mirror to fold and unfold.
Mirror Heater	This will command the passenger mirror heater ON and OFF.
Mirror Left/Right	This will command the passenger mirror left and right.
Mirror Up/Down	This will command the passenger mirror up and down.
Non-Integrated Sw. Backlighting Test	The scan tool commands the % intensity of the non-integrated switches backlighting.
Power Window Motor Programming	This will enable the driver power window motor to be programmed.
Puddle/Courtesy Lamp	This will command the courtesy lamps ON and OFF.