Removal Procedure
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Depressurize the air suspension system. Refer to Air Suspension Depressurization .
- Remove the air compressor assembly. Refer to Compressor Assembly Automatic Level Control Air Replacement .
- Disconnect the air hose (1) from the air dryer.
- Remove the air compressor nuts and washers (3).
- Remove the air compressor with the dryer (2) from the bracket.
IMPORTANT:
Do NOT remove an air supply pipe in an attempt to depressurize the air suspension. Always follow the Air Suspension Depressurization Procedure. Refer to Air Suspension Depressurization . Failure to follow this procedure may cause personal injury or damage to the vehicle.
IMPORTANT:
Before disconnecting the air hoses from the intake air filter or the air compressor note the location of each hose. Clean the components and the surrounding area to prevent dirt and other foreign material from entering the ECAS (Electronically Controlled Air Suspension) system.