Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Object Sensor Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Fig 2: View Of Rear Object Sensor Assembly
Courtesy of GENERAL MOTORS CORP.
Lift the locking tabs on the housing (4) and remove the rear object sensor (1).

Fig 3: View Of Spring & Housing
Courtesy of GENERAL MOTORS CORP.
Squeeze the spring (1) and remove it from the housing (2).

Fig 4: View Of Rear Object Sensor Housing Tabs
Courtesy of GENERAL MOTORS CORP.
Release the tabs on the housing and remove.

Fig 5: View Of Rear Object Sensor Bezel
Courtesy of GENERAL MOTORS CORP.
Remove the rear object sensor bezel from the rear fascia.