Cruise Control Switch: Service and Repair

REPLACEMENT

HINT: Installation is in the reverse order of removal.

1. PRECAUTION
Refer to Air Bag Systems; Service Precautions.

NOTE: When disconnecting the battery terminal, initialize the following systems after the terminal is reconnected.
- Power window control system
- Sliding roof system

2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE HORN BUTTON ASSEMBLY




4. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 screws.




c. Pull out the cruise control main switch assembly in the direction shown by the arrow in the illustration.

5. INSTALL HORN BUTTON ASSEMBLY
6. INSPECT HORN BUTTON ASSEMBLY
7. CONNECT BATTERY NEGATIVE TERMINAL
8. INSPECT SRS WARNING LIGHT