LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2007 >> tC Spec, Standard >> Repair and Diagnosis >> General Information >> Computer Relearn >> Engine Control System (2AZ-FE) >> Mass Air Flow Meter >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mass Air Flow Meter: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
      NOTE: Make sure that the O-ring is not cracked or jammed when installing.
    2. Connect the mass air flow meter connector.
  2. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL 
  3. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
      Fig 1: Locating Mass Air Flow Meter Screw
      G04869313Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals